No edit summary |
No edit summary |
||
| (131 intermediate revisions by 52 users not shown) | |||
| Line 1: | Line 1: | ||
| ⚫ | |||
| − | {{IDRIVEcur}} |
||
| − | {{doom}} |
||
| − | [[Image: |
+ | [[Image:Lukesaberanh.jpg|thumb|right|300px|[[Obi-Wan Kenobi|Ben Kenobi]] introduces [[Luke Skywalker]] to the elegance of a lightsaber.]] |
| ⚫ | The '''lightsaber''' (less formally, the '''laser sword''') was more than just the distinctive weapon of the [[Jedi]]; it was a segment of the order's history and its ultimate symbol for millennia. There could be no Jedi without a lightsaber and no lightsaber without a Jedi in the eyes of [[Galactic|galactic]] denizens. Over the years, it came to be associated with gallantry and elegance otherwise lost in an age of [[blaster]]s. Jedi traditionally constructed their own lightsaber as part of their training. To carry a lightsaber was an example of incredible skill and confidence, dexterity and attuning to the [[Force]]. Since its plasma blade was essentially weightless, the weapon produced a gyroscopic effect, and so it was very difficult to handle safely. Yet this made the weapon ideal for [[Force-sensitive]] users whose ability to predict the various energy pulsations through the force allowed him or her to compensate for them. They also served as a means by which a Jedi's focus was attuned to the force during combat. For the same reason, it was also a very quick weapon, and superhuman reaction times were necessary to capitalize fully on this advantage. Only a handful of non-Force-sensitives have been known to master it, and none of them has ever presented a challenge for a fully-trained Jedi, save the lethally effective [[General Grievous]]. |
||
| ⚫ | |||
| − | |||
| ⚫ | The '''lightsaber''' (less formally, the '''laser sword''') was more than just the distinctive weapon of the [[Jedi]] |
||
==History== |
==History== |
||
| − | |||
[[Image:Archaiclightsaber.JPG|left|thumb|135px|[[Odan-Urr]] wielding his archaic lightsaber.]] |
[[Image:Archaiclightsaber.JPG|left|thumb|135px|[[Odan-Urr]] wielding his archaic lightsaber.]] |
||
| + | Since the formation of the [[Tython]] Jedi after the [[Force Wars]] circa [[25,000 BBY]], ceremonial weapons have been an integral part of the Jedi. The first Knights used alloy swords imbued with elements of the Force through a ritual called the [[Jedi Forge]]. Combining advanced offworld technology with the forging ritual, the Jedi learned to "freeze" a laser beam, the basis of technology that would lead the Jedi toward the design of future lightsabers. |
||
| − | Millennia in the past, about 9,990 BBY, the Jedi discovered that a super-heated plasmoid substance could be generated and held in place with a field around the plasma. The field could be set so that the plasmoid-like substance could not escape, but other objects could pass into the ultra-hot core. This created a deadly blade of energy that could slice its way through almost any substance. Such fields blocked one another, so the best defense against one blade was another blade. The field could be maintained almost indefinitely if linked to the generating device, because it functioned as a closed loop. |
||
| − | |||
| − | Thus the lightsaber was invented. The first lightsaber-like weapons were developed for siege purposes, using "frozen blaster" technology. The separate power pack they required was often worn on the back. |
||
| + | By the time of the [[Duinuogwuin Contention]] around [[15,500 BBY]], their studies in energy technology yielded success. The Jedi learned how to generate a focused beam of energy that arced circumferentially back to its source, creating the first portable high-energy blade. These preliminary lightsabers inefficiently guzzled power from a belt-mounted power supply and were terribly unstable. They could only be used for brief durations before overheating. Because of these flaws in design, the first lightsabers were little more than ceremonial appurtenance to the [[Jedi apparel]], seldom worn, much less utilized. |
||
| − | The lightsaber eventually evolved to have a smaller energy pack that could be worn on a belt. In time, the power pack was miniaturized enough to fit into the weapon’s hilt. |
||
| + | The shortfalls that plagued the weapon's previous designs were corrected through the ages, so that by the [[Hundred-Year Darkness]] of [[7,000 BBY]] the cumbersome and rare siege weapons of previous years gave way to elegant and commonly used lightsabers. Power output continued to be an issue, however, and required the continued use of an external power pack worn on the belt. The power cable from belt to blade tended to restrict the Jedi's movement in combat, but the newly stable blade granted them a superior advantage in hand-to-hand combat against heavily armored foes. |
||
| − | This smaller lightsaber gave the advantage to hand-to-hand troops whose adversaries (with high-density armor and even personal repulsor [[shield]]s) were impervious to primitive [[slugthrower|slugthrowing weapons]]. |
||
| + | It wasn't until after the [[Great Hyperspace War]] that the modern lightsaber was designed. The restricting power cable and external power pack of old designs were replaced with internal power components by the time of the [[Gank Massacres]] in [[4,800 BBY]]. An internal superconductor was introduced which transferred the returning looped energy from the negative-charged flux aperture back into an internal power cell. With this modification, the power cell would only expend power when the energy loop was broken (when the lightsaber blade cut into something), at last solving the ages-old power supply problem. |
||
| − | Further advances in the science of field technology allowed for a self-sustaining bubble of containment to be generated. A plasmoid could be generated and flung out at an opponent for quite some distance before it finally dissipated. This gave way to the invention of the [[blaster]]. From then on, lightsaber combat evolved to include forms that could counter blaster bolts as well as other blades. |
||
| − | After the [[Great Jedi Purge]], lightsabers became rare relics |
+ | After the [[Great Jedi Purge]], lightsabers became rare relics prized by some collectors. In the years of [[Palpatine|Palpatine's]] Empire, some lightsabers found their way onto the black market and were sold for untold amounts. They only truly re-entered the galactic scene with the rise of the [[New Jedi Order]], thanks to the teachings of [[Luke Skywalker]] and the re-discovery of ancient Jedi holocrons and teachings believed lost after the Jedi Purges. |
| + | After the fall of Palpatine and the re-emergence of the Jedi, other groups of Force-users like [[Reborn|Desann's Reborn]] and the [[Disciples of Ragnos]] mass-produced lightsabers to arm their fast-growing legions. By contrast, the New Jedi maintained the old ways and rituals, using their connections with the Force to personally construct their own sabers. |
||
| − | Since that time various dissenting force-able factions have arisen and the mass production of lightsabers has resurfaced, as it seems to have done in the past, during the Clone Wars, when the need for lightsabers was greatest. Such groups that made use of mass production outside the Jedi Order were the Reborn followers of the fallen Jedi Desann, and the Disciples of Ragnos. The traditions of personal construction or customization of lightsabers has come back into vogue among the New Jedi, as in times past, but also bourne partially out of necessity, due to the initial scarcity of the weapons following the Empire's purge. With the discovery of previously "lost" Old Republic Jedi documents and resources, the personal craftsmanship of Lightsabers has become less a case of necessity but perhaps more one of the personal self-discipline so characteristic of Jedi ideals. |
||
==Lightsaber colors== |
==Lightsaber colors== |
||
| − | The color of a lightsaber blade was heavily dependent on the crystal used in its construction. For the Jedi, these crystals came in many colors and were extracted from natural deposits. Sith, however, made use of [[synth-crystal]]s to power their weapons, which resulted in Sith blades being almost uniformly red. It should be noted that synthetic crystals do not always result in red blades, since Luke Skywalker's synthetic crystals resulted in a green blade. Jedi have been known to produce blades that are red or approaching that color (such as purple), but perhaps due to the force of tradition, the Jedi Order typically avoided any colors that might associate them with the Sith. |
+ | The color of a lightsaber blade was heavily dependent on the crystal used in its construction. For the Jedi, these crystals came in many colors and were extracted from natural deposits. Sith, however, made use of [[synth-crystal]]s to power their weapons, which resulted in Sith blades being almost uniformly red. It should be noted that synthetic crystals do not always result in red blades, since Luke Skywalker's synthetic crystals resulted in a green blade. Jedi have been known to produce blades that are red or approaching that color (such as purple), but perhaps due to the force of tradition, the Jedi Order typically avoided any colors that might associate them with the Sith. Despite this, a small number of Jedi (such as [[Adi Gallia]] during the time of the Clone Wars) used a red bladed lightsaber. |
Ancient Jedi wielded blades of many colors; blue, green and red, as well as purple, orange, silver, turquoise, pink, bronze, yellow, viridian, and possibly white and gold, among others; the full variety and extent of focusing gems, and consequently, of colors, is unknown. |
Ancient Jedi wielded blades of many colors; blue, green and red, as well as purple, orange, silver, turquoise, pink, bronze, yellow, viridian, and possibly white and gold, among others; the full variety and extent of focusing gems, and consequently, of colors, is unknown. |
||
| − | By the time of [[Battle of Naboo]], however, the Jedi used the caves of [[Ilum]] as their primary source of lightsaber crystals. These caves were rich in green and blue crystals, explaining the absence - with the exception of Mace Windu's |
+ | By the time of [[Battle of Naboo]], however, the Jedi used the caves of [[Ilum]] as their primary source of lightsaber crystals. These caves were rich in green and blue crystals, explaining the absence - with the exception of Mace Windu's and Plo Koon's blades (purple and yellow respectively) - of alternate colors among the Jedi ranks during this period. During the Clone Wars, major portions of the Ilum caves were destroyed by the [[Confederacy of Independent Systems]]. The Empire destroyed crystals on an even larger scale after the war. Bereft of these resources, the Jedi of Luke Skywalker's Order were again forced to scour the galaxy for usable crystals, creating a resurgence in more varied blades. One lightsaber in particular, created by the Jedi student [[Gantoris]], was violet with patterns of rainbow light rippling across its white core.[[Image:Dookuepisodeiii.jpg|right|thumb|300px|Dooku duels [[Obi-Wan Kenobi]] and [[Anakin Skywalker]] aboard ''[[Invisible Hand]]''.]] |
| − | The 'synthetic' red blade producing crystals favored by the Sith can create a somewhat more powerful blade than blue or green crystals, but are not as pure due to their artificial nature and can thus be undesirable as the focus of a lightsaber. Often the Sith Master would craft the crystal and gift it to his apprentice. Despite the differences in color, the function of the different colored blades is the same. Once techniques of synthesizing crystals became more well known, the restrictions on color |
+ | The 'synthetic' red blade producing crystals favored by the Sith can create a somewhat more powerful blade than blue or green crystals, but are not as pure due to their artificial nature and can thus be undesirable as the focus of a lightsaber. Often the Sith Master would craft the crystal and gift it to his apprentice. Despite the differences in color, the function of the different colored blades is the same. Once techniques of synthesizing crystals became more well known, the restrictions on color became less of a concern, except for matters of personal taste or political statement. Various "Dark Jedi" not associated with the extinct Sith Order often retain the colors used as Jedi, though some continue to choose red for symbolic reasons. Plenty of examples exist, however, of Dark Side users who did not use red blades, and even those who were not Dark Siders who used red blades with no ill effects. This has lead many to assume that the color is merely a symbolic consideration, depending on the user. |
| − | Some have speculated that the red lightsabers are actually a product of the influence of the Dark Side of the Force. It is alleged that somehow the one constructing the saber actually "infuses" some aspect of the Dark Side into the device itself, causing the blade to change color. This might also explain why Dark Side users so often switch to red after turning. However such a notion could be explained away as superstition, and speculation based on the common practice of the Sith using red blades. Those who embrace the Dark Side may simply wish to imitate the Sith traditions by choosing a color favored by them. That such misinformation could be spread among the general public would give the Jedi one more reason not to associate with them by choosing colors other than red. |
+ | Some have speculated that the red lightsabers are actually a product of the influence of the Dark Side of the Force. It is alleged that somehow the one constructing the saber actually "infuses" some aspect of the Dark Side into the device itself, causing the blade to change color. This might also explain why Dark Side users so often switch to red after turning. However such a notion could be explained away as superstition, and speculation based on the common practice of the Sith using red blades (after all, [[Exar Kun]], who was one of the most feared Sith Lords of all time, wielded a double-bladed blue lightsaber). Those who embrace the Dark Side may simply wish to imitate the Sith traditions by choosing a color favored by them. That such misinformation could be spread among the general public would give the Jedi one more reason not to associate with them by choosing colors other than red. |
| + | |||
| + | This being noted, there were advantages and disadvantages to [[Sith crystal]]s. As mentioned before, they could actually produce a blade stronger than traditional crystals, which possessed the possibility to "break the blade" of other sabers by overloading the energy matrix and instantly burning out the enemy's weapon. Although a rare occurance, it was still common knowledge and a terrifying proposition in duels. Additionally, Sith blades also seemed to be less maneuverable than their Jedi counterparts. |
||
There is some controversy surrounding what exactly produces blade color in a lightsaber. Is it purely based on the type or color of crystal, the focusing mechanism, power level, "tuning" or some other aspect? Clearly, the crystal has some effect, but it may not be the sole factor in determining the color. It can be difficult to say since so much lore has become tied up in the lightsaber over the centuries and so much information distorted or lost due to the influence of the Empire and the Sith. |
There is some controversy surrounding what exactly produces blade color in a lightsaber. Is it purely based on the type or color of crystal, the focusing mechanism, power level, "tuning" or some other aspect? Clearly, the crystal has some effect, but it may not be the sole factor in determining the color. It can be difficult to say since so much lore has become tied up in the lightsaber over the centuries and so much information distorted or lost due to the influence of the Empire and the Sith. |
||
| Line 43: | Line 39: | ||
* '''Archaic Lightsaber''' — This is the earliest-known type of laser sword, developed as a siege weapon. It required a separate power pack to work, which was often worn on the back, and later, as technology simplified power packs, a belt-worn power source. The moves that could be performed with an archaic lightsaber were more limited than those that could be achieved with a modern laser sword because of the cord that connected the hilt to its power source. |
* '''Archaic Lightsaber''' — This is the earliest-known type of laser sword, developed as a siege weapon. It required a separate power pack to work, which was often worn on the back, and later, as technology simplified power packs, a belt-worn power source. The moves that could be performed with an archaic lightsaber were more limited than those that could be achieved with a modern laser sword because of the cord that connected the hilt to its power source. |
||
* '''Crystal Lightsaber''' — The general term used for any standard lightsaber with focusing crystals. After the miniaturization of power packs, this was the standard weapon for millennia. It typically consisted of a core crystal which determined color, and two extra crystal chambers which could enhance and personalize the saber to the Jedi that used it. There have been instances of multi-colored blades; however this was not a result of the secondary crystals. It is unknown what exactly caused this color variation, but it was most likely a result of the core crystal itself. |
* '''Crystal Lightsaber''' — The general term used for any standard lightsaber with focusing crystals. After the miniaturization of power packs, this was the standard weapon for millennia. It typically consisted of a core crystal which determined color, and two extra crystal chambers which could enhance and personalize the saber to the Jedi that used it. There have been instances of multi-colored blades; however this was not a result of the secondary crystals. It is unknown what exactly caused this color variation, but it was most likely a result of the core crystal itself. |
||
| + | |||
| − | [[Image: |
+ | [[Image:Fibre_Lightsabers.png|thumbnail|left|200px|[[Asajj Ventress]] whirls her fibre-cord linked curve hilted lightsabers.]] |
| ⚫ | |||
| + | |||
| ⚫ | * '''Curve-hilted Lightsaber''' — A standard design during the prime of Form II lightsaber combat, curved hilts allowed more spinning action during blade-to-blade duels. It was also |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | * '''Curve-hilted Lightsaber''' — A standard design during the prime of [[Lightsaber combat|Form II lightsaber combat]], curved hilts allowed more spinning action during blade-to-blade duels. It was also more complex and gave the maker more of a challenge in aligning its crystals. This lightsaber was known to be used by [[Count Dooku]], his apprentice [[Komari Vosa]], and later his [[Dark Side Adept]] [[Asajj Ventress]]. Asajj Ventress's lightsabers could combine to make a curved double blade. This was also known as paired lightsabers. |
||
| ⚫ | * '''[[Double-bladed lightsaber]]'''— |
||
| + | |||
| ⚫ | |||
| + | |||
| ⚫ | * '''[[Double-bladed lightsaber]]'''— also '''Saberstaff''' or '''Lightstaff''' — A long-hilted version of the standard lightsaber. Each blade could be activated independently of one another or simultaneously. It could be one hilt or two normal lightsabers attached together. This was often even more dangerous to the untrained wielder than to the opponent. It came to be known as a Sith lightsaber because it was preferred by Sith and was possibly invented by [[Dark Lord of the Sith]] [[Exar Kun]], whose lightsaber was both double-bladed and dual-phase. This made his personal style of [[lightsaber combat]] very complex, as he would vary the strength and length of either blade independently; sometimes letting the opponent's blade pass right through his, sometimes blocking. |
||
[[Darth Maul]] was inspired by Kun and created his own saber staff which he used with amazing prowess. Asajj Ventress would connect her two curve-hilted lightsabers together to form a unique type of saber staff termed [[fiber-cord linked lightsabers]]. It was also temporarily popularized by the Jedi during the Mandalorian Wars, where it was more useful then the standard lightsaber when fighting the extremely skilled and powerful Mandalorians. |
[[Darth Maul]] was inspired by Kun and created his own saber staff which he used with amazing prowess. Asajj Ventress would connect her two curve-hilted lightsabers together to form a unique type of saber staff termed [[fiber-cord linked lightsabers]]. It was also temporarily popularized by the Jedi during the Mandalorian Wars, where it was more useful then the standard lightsaber when fighting the extremely skilled and powerful Mandalorians. |
||
| + | |||
| ⚫ | |||
| + | |||
| ⚫ | * '''[[Electrum]] Lightsaber''' — A lightsaber with a hilt forged from gold-like [[electrum]] was often called an "electrum lightsaber". The electrum finish gave the lightsaber a majestic, regal appearance and in the last days of the Old Jedi Order, golden and electrum lightsabers were reserved for members of the Jedi Council. Mace Windu's and Darth Sidious' lightsabers are examples of such kind. |
||
* '''Dual-phase Lightsaber''' — Multiple crystals allowed the user to switch between two blade lengths in battle with the dual-phase saber. It was a quite common lightsaber type both in the Old Jedi Order and the New Jedi Order. [[Anakin Skywalker]]/[[Darth Vader]] wielded such a lightsaber, as did, for example, [[Micah Giett]], Gantoris, and [[Corran Horn]]. |
* '''Dual-phase Lightsaber''' — Multiple crystals allowed the user to switch between two blade lengths in battle with the dual-phase saber. It was a quite common lightsaber type both in the Old Jedi Order and the New Jedi Order. [[Anakin Skywalker]]/[[Darth Vader]] wielded such a lightsaber, as did, for example, [[Micah Giett]], Gantoris, and [[Corran Horn]]. |
||
| ⚫ | |||
| ⚫ | |||
| + | |||
| ⚫ | * '''[[Electrum]] Lightsaber''' — A lightsaber with a hilt forged from gold-like [[electrum]] was often called "electrum lightsaber". The electrum finish gave the lightsaber a majestic, regal appearance and in the last days of the Old Jedi Order, golden and electrum lightsabers were reserved for members of the Jedi Council. Mace Windu's and Darth Sidious' |
||
| ⚫ | |||
| ⚫ | |||
| + | |||
| ⚫ | |||
| − | *''' |
+ | *'''Short Lightsaber''' — The short lightsaber employed a shorter blade than the more common lightsaber. The smaller blade allowed for easier use in combat by those Jedi that were smaller in stature, such as [[Jedi Master]]s [[Yoda]] and [[Tsui Choi]]. A longer, though still short, variation was often used by practitioners of [[Form X: Niman / Jar'Kai]]. |
| + | * '''[[Forked lightsaber]]''' — This form of twin-bladed lightsaber was essentially a regular crystal lightsaber with a second emitter coming out of the hilt at a 45 degree angle to the axis of the lightsaber. The hilt was also slightly curved. One of the only known [[Jedi Knights]] to use this lightsaber style fought in the [[Clone Wars]] at the Battle of [[Parcelus Minor]]. |
||
* '''[[Lightdagger]]''' — The lightdagger was a lightsaber with a shorter blade and could be used as an assault knife. Luke Skywalker constructed his own lightdaggers after the [[Battle of Endor]]. Because this type of lightsaber had a very small blade, it could be easily used by non-Force-sensitives. [[Black Sun]] [[vigo]] [[Darnada]]'s bodyguard, [[Sinya]], carried two baton-style lightdaggers. Master [[Sora Bulq]] during the Clone Wars era was known to carry a lightdagger which he used in combat with Senior Jedi Master [[Mace Windu]]. |
* '''[[Lightdagger]]''' — The lightdagger was a lightsaber with a shorter blade and could be used as an assault knife. Luke Skywalker constructed his own lightdaggers after the [[Battle of Endor]]. Because this type of lightsaber had a very small blade, it could be easily used by non-Force-sensitives. [[Black Sun]] [[vigo]] [[Darnada]]'s bodyguard, [[Sinya]], carried two baton-style lightdaggers. Master [[Sora Bulq]] during the Clone Wars era was known to carry a lightdagger which he used in combat with Senior Jedi Master [[Mace Windu]]. |
||
| + | |||
| ⚫ | * '''[[Lightwhip]]''' — The lightwhip was an exotic variation of the lightsaber that only specially trained [[Jedi]] could wield. It could either have a solid core of cortosis or other lightsaber-resistant minerals or it could be a blade of pure energy sheathed in deadly energy. Like the lightsaber, it emitted a coherent beam of energy, but it was long and flexible |
||
| + | [[Image:Githany lightwhip.jpg|left|thumb|260px|[[Githany]] fighting [[Kiel Charny]] with her lightwhip.]] |
||
| + | |||
| ⚫ | * '''[[Lightwhip]]''' — The lightwhip was an exotic variation of the lightsaber that only specially trained [[Jedi]] could wield. It could either have a solid core of cortosis or other lightsaber-resistant minerals (see below) or it could be a blade of pure energy sheathed in deadly energy. Like the lightsaber, it emitted a coherent beam of energy, but unlike the lightsaber's, it was long and flexible to be wielded like a whip. It is believed this saber is the only one that functions just as well in water as on land, although for some reason it wasn't flexible underwater and appeared and functioned like a normal lightsaber when submerged. Known users of the lightwhip included Jedi [[Kit Fisto]], Dark Jedi [[Lumiya]], the Sith Lady [[Githany]] and the [[Black Sun]] [[Vigo]] [[Xist]]. |
||
*'''[[Training lightsaber]]s''' — The training lightsaber was used by Jedi [[Younglings]], to practice lightsaber combat. While non-lethal, contact with the blade could cause bruising and even minor burns. This type of lightsaber was often used in conjunction with the basic [[Shii-Cho]] style of [[lightsaber combat]]. |
*'''[[Training lightsaber]]s''' — The training lightsaber was used by Jedi [[Younglings]], to practice lightsaber combat. While non-lethal, contact with the blade could cause bruising and even minor burns. This type of lightsaber was often used in conjunction with the basic [[Shii-Cho]] style of [[lightsaber combat]]. |
||
==Cutting power== |
==Cutting power== |
||
| + | |||
| + | [[Image:Quigondoor.jpg|thumbnail|right|280px|[[Qui-Gon Jinn]] cuts through a [[blast door]] in a [[Trade Federation]] [[starship]].]] |
||
| + | |||
Lightsaber blades do not radiate heat unless they come into contact with something. Then the intensely hot blade can cut through almost any substance when appropriate force is applied. A few notable exceptions do exist however: |
Lightsaber blades do not radiate heat unless they come into contact with something. Then the intensely hot blade can cut through almost any substance when appropriate force is applied. A few notable exceptions do exist however: |
||
| − | * [[Cortosis|Cortosis ore]]: A unique substance able to shut down a lightsaber upon contact. Some types of Cortosis |
+ | * [[Cortosis|Cortosis ore]]: A unique substance able to shut down a lightsaber upon contact. Some types of Cortosis armor merely resist a blade rather than shorting it out. However, some people think this to be somewhat inaccurate. Cortosis Battle Droids were used during an attack on the [[Jedi Temple]]. A [[Cortosis blade]] was also used against an attack on [[Darth Vader]] after [[Order 66]]. |
* "Armorweave" is a cloth that is said to give some resistance to lightsabers, though such protection afforded is obviously limited by the thickness and reinforcement of the material (just as a "bullet proof vest" is not impenetrable to all bullets). |
* "Armorweave" is a cloth that is said to give some resistance to lightsabers, though such protection afforded is obviously limited by the thickness and reinforcement of the material (just as a "bullet proof vest" is not impenetrable to all bullets). |
||
| − | *[[Phrik]] alloy: Used in [[electrostaff]]s, [[Palpatine]]'s lightsaber and [[Dark Trooper]] |
+ | *[[Phrik]] alloy: Used in [[electrostaff]]s, [[Palpatine]]'s lightsaber and [[Dark Trooper]] armor. [[General Grievous]]'s MagnaGuards use electrostaffs as their weapon. |
* An unnamed metal superconductor used for ship armor hundreds of years before the [[Galactic Empire]]. |
* An unnamed metal superconductor used for ship armor hundreds of years before the [[Galactic Empire]]. |
||
| + | * The alchemically altered [[Sith Sword]] used by the original Sith Empire. |
||
* [[Mandalorian iron]]: A metal used by the Mandalorian warriors. |
* [[Mandalorian iron]]: A metal used by the Mandalorian warriors. |
||
| − | * [[Yuuzhan Vong]] bio-engineered weaponry and armor, such as the [[amphistaff]]. |
+ | * [[Yuuzhan Vong]] bio-engineered weaponry and armor, such as the [[amphistaff]]. However, weaknesses were soon found in the armor and staff. |
* Certain types of energy [[shield]]s. |
* Certain types of energy [[shield]]s. |
||
| − | * Other dense or resistant materials, like the |
+ | * Other dense or resistant materials, like the armor worn by Lord Darth Vader and the hulls of starfighters during the Clone Wars. However, Vader's armor could be cut or broken by lightsabers. |
| + | Some creatures, such as lava dragons, were possesed of natural armour that reflected the blade much as the blade reflected a blaster bolt. |
||
==Methods of use== |
==Methods of use== |
||
| + | |||
''See also: [[lightsaber combat]]'' |
''See also: [[lightsaber combat]]'' |
||
| + | [[Image:Shii-Cho.jpg|left|thumb|250px|[[Kit Fisto]]'s [[Shii-Cho]] in use against [[Darth Sidious]]'s [[Ataru]].]] |
||
| ⚫ | The lightsaber was a very versatile weapon, owing to its unique lightness and omni- |
||
| ⚫ | The lightsaber was a very versatile weapon, owing to its unique lightness and omni-directional cutting ability. It could be wielded one-handed with ease, though Jedi were routinely trained in using the saber with both and either hands, so as to be prepared for all situations. Early in the weapon's history, when the Sith were numerous, the art of lightsaber dueling flourished. In later periods though, only rarely would Jedi face an adversary with a weapon capable of deflecting a lightsaber. Using Jedi prescience, a lightsaber wielder could anticipate a [[blaster]] bolt's path and deflect it with his or her lightsaber. |
||
| ⚫ | |||
| + | |||
| ⚫ | |||
Forms: |
Forms: |
||
*[[Form I: Shii-Cho]] |
*[[Form I: Shii-Cho]] |
||
| + | Example Users: [[Kit Fisto]], Jedi Younglings |
||
*[[Form II: Makashi]] |
*[[Form II: Makashi]] |
||
| + | Example Users: [[Count]] [[Dooku]] |
||
*[[Form III: Soresu]] |
*[[Form III: Soresu]] |
||
| + | Example Users: [[Obi-Wan Kenobi]] |
||
*[[Form IV: Ataru]] |
*[[Form IV: Ataru]] |
||
| + | Example Users: [[Yoda]], [[Darth Sidious]], [[Qui-Gon Jinn]] |
||
*[[Form V: Shien / Djem So]] |
*[[Form V: Shien / Djem So]] |
||
| + | Example Users: [[Anakin Skywalker]], [[Plo Koon]] |
||
*[[Form VI: Niman]] |
*[[Form VI: Niman]] |
||
| + | Example Users: [[Coleman Trebor]] |
||
| − | *[[Form VII: Juyo/Vaapad]] |
+ | *[[Form VII: Juyo/Vaapad]] |
| + | Example Users: [[Mace Windu]], [[Depa Billaba]], [[Sora Bulq]], [[Quinlan Vos]], [[Darth Maul]] |
||
*[[Form VIII: Sokan]] |
*[[Form VIII: Sokan]] |
||
| + | Example Users: [[Obi-Wan Kenobi]] |
||
*[[Form IX: Shien]] |
*[[Form IX: Shien]] |
||
| + | Example Users: [[Adi Gallia]] |
||
*[[Form X: Niman / Jar'Kai]] |
*[[Form X: Niman / Jar'Kai]] |
||
| + | Example Users: [[Boc]] |
||
*A Force ability known as [[Saber throw]] |
*A Force ability known as [[Saber throw]] |
||
| + | Example Users: [[Darth Vader]], [[Yoda]], [[Anakin Skywalker]] |
||
==Construction details== |
==Construction details== |
||
| − | {{quote|The crystal is the heart of the blade. The heart is the crystal of the Jedi. The Jedi is the crystal of the Force. The Force is the blade of the heart. All are intertwined: |
+ | {{quote|The crystal is the heart of the blade. The heart is the crystal of the Jedi. The Jedi is the crystal of the Force. The Force is the blade of the heart. All are intertwined: the crystal, the blade, the Jedi. You are one.|[[Luminara Unduli]], during a lightsaber construction ceremony}} [[Image:Gnome-speakernotes.png|20px|(audio)]][[Media:SaberCeremony.ogg|Listen]] |
The lightsaber was made up of a short polished metallic cylindrical tube (30 centimeters) that emitted a beam of a [[plasma]]-like substance, or plasmoid. |
The lightsaber was made up of a short polished metallic cylindrical tube (30 centimeters) that emitted a beam of a [[plasma]]-like substance, or plasmoid. |
||
| Line 107: | Line 134: | ||
* A power conduit |
* A power conduit |
||
* A recharge socket |
* A recharge socket |
||
| − | |||
The focusing crystal was the central component of the lightsaber. The crystals were wired to the diatium power cell, which acted like an energy source for the lightsaber. |
The focusing crystal was the central component of the lightsaber. The crystals were wired to the diatium power cell, which acted like an energy source for the lightsaber. |
||
| ⚫ | During the [[Great Sith War]] epoch, many lightsabers were manufactured using kunda stones, a natural geologic formation from the planet [[Kadril]] which boast numerous practical applications in medicine and communications. They could also be combined with normal lightsaber lenses to produce a broader, yet still-focused, beam than is usual. |
||
| − | |||
| ⚫ | During the [[Great Sith War]] epoch, many lightsabers |
||
Perhaps the most unusual lightsaber design belonged to [[Roblio Darté]]. His lightsaber was constructed like a regular lightsaber except for one thing. Aside from the main blade of the weapon, there was a smaller, second blade jutting out at an angle from the hilt. |
Perhaps the most unusual lightsaber design belonged to [[Roblio Darté]]. His lightsaber was constructed like a regular lightsaber except for one thing. Aside from the main blade of the weapon, there was a smaller, second blade jutting out at an angle from the hilt. |
||
| Line 122: | Line 147: | ||
Sometimes certain events necessitated a change in a Jedi's preferred weapon. A Jedi would modify the lightsaber or construct a new one to suit the demands of the situation at hand, such as with [[Mace Windu]] and his lightsaber after the [[Battle of Naboo]]. |
Sometimes certain events necessitated a change in a Jedi's preferred weapon. A Jedi would modify the lightsaber or construct a new one to suit the demands of the situation at hand, such as with [[Mace Windu]] and his lightsaber after the [[Battle of Naboo]]. |
||
| − | On certain occasions, the [[Jedi]] would have to build a provisional lightsaber. This was the case of [[Corran Horn]] who, shortly after he had first left the [[New Jedi Order]] to search for [[Mirax Terrik|his lost wife]], build a lightsaber from the handle of a [[speederbike]]. While |
+ | On certain occasions, the [[Jedi]] would have to build a provisional lightsaber. This was the case of [[Corran Horn]] who, shortly after he had first left the [[New Jedi Order]] to search for [[Mirax Terrik|his lost wife]], build a lightsaber from the handle of a [[speederbike]]. While functioning reasonably well, the lightsaber would now and again flicker and switch off by itself due to a design flaw by Horn. |
==Concordance of Fealty== |
==Concordance of Fealty== |
||
| − | [[Image:Concordance of Fealty.jpg|thumb|Concordance of Fealty between Master [[Eeth Koth]] and Master [[Mace Windu]].| |
+ | [[Image:Concordance of Fealty.jpg|thumb|left|Concordance of Fealty between Master [[Eeth Koth]] and Master [[Mace Windu]].|150px]] |
:''"Master [[Eeth Koth]], I have something to return to you. It is a product of your own hands which you once entrusted to mine. In returning this lightsaber, I return your trust."'' |
:''"Master [[Eeth Koth]], I have something to return to you. It is a product of your own hands which you once entrusted to mine. In returning this lightsaber, I return your trust."'' |
||
| Line 135: | Line 160: | ||
== Users == |
== Users == |
||
| − | Although the lightsaber was used primarily by the Jedi and Sith |
+ | Although the lightsaber was used primarily by the Jedi and Sith Force users, several non-Force users were known to have used a lightsaber: |
[[Thall Joben]] once used a green lightsaber, as he explained to his droid [[C-3PO]] that he once did some work for someone who owned a speeder, but they left the speeder with him and never reclaimed it; the lightsaber was one of the things left in the speeder by the person. It is unknown if this customer of Thall's was actually a Jedi or was simply someone who killed a Jedi or a Sith and took the lightsaber from them. Most likely, it was the latter, as most Jedi and Sith do not simply forget their lightsabers. |
[[Thall Joben]] once used a green lightsaber, as he explained to his droid [[C-3PO]] that he once did some work for someone who owned a speeder, but they left the speeder with him and never reclaimed it; the lightsaber was one of the things left in the speeder by the person. It is unknown if this customer of Thall's was actually a Jedi or was simply someone who killed a Jedi or a Sith and took the lightsaber from them. Most likely, it was the latter, as most Jedi and Sith do not simply forget their lightsabers. |
||
[[Han Solo]] used [[Luke Skywalker]]'s (formerly [[Anakin Skywalker]]'s) lightsaber after he rescued Luke from a snowstorm on [[Hoth]]. Solo used the lightsaber to slice open the body of a dead [[Tauntaun]], whose insides he then used to keep Luke warm while he constructed a proper shelter for the both of them. |
[[Han Solo]] used [[Luke Skywalker]]'s (formerly [[Anakin Skywalker]]'s) lightsaber after he rescued Luke from a snowstorm on [[Hoth]]. Solo used the lightsaber to slice open the body of a dead [[Tauntaun]], whose insides he then used to keep Luke warm while he constructed a proper shelter for the both of them. |
||
| + | |||
| − | Han also used [[Mara Jade]]'s lightsaber to chop down [[Killiks]] shortly before the [[Swarm War]]. |
||
| + | [[Mara Jade]]'s lightsaber was also used by Han to chop down [[Killiks]] shortly before the [[Swarm War]]. When he briefly lost it, [[Tarfang]], an [[Ewok]] smuggler, viciously wielded the lightsaber to dice up Kiliks to great effect. |
||
[[Anja Gallandro]], daughter of the deceased bounty hunter [[Gallandro]], wielded an acid-yellow lightsaber of particularly ancient make in service to the [[Black Sun]] figure known as Czethros. |
[[Anja Gallandro]], daughter of the deceased bounty hunter [[Gallandro]], wielded an acid-yellow lightsaber of particularly ancient make in service to the [[Black Sun]] figure known as Czethros. |
||
| − | [[Darca Nyl]], |
+ | [[Darca Nyl]], an ex-[[mercenary]], used the green lightsaber of a dead Jedi during his pursuit of [[Lycan]]. Though he rarely used it in battle, it often gave him the advantage of being able to pass for a true Jedi. It was destroyed along with Lycan in a trap laid by Darca in a Force-sensitive cave on [[Molavar]]. |
| + | [[Suvam Tan]] the eccentric [[Rodian]] inventor was such a mechanical genius that he managed to construct his own lightsaber from scratch despite not having any [[Force]] sensitivity. It's unknown whether or not Suvam was actually able to use his lightsaber, though. |
||
| ⚫ | |||
| + | |||
| ⚫ | [[General Grievous]] properly the most famous user of lightsabers without the force would be who used lightsabers during the [[Clone Wars]], all of which were taken from Jedi he had either killed or defeated in battle, except for [[Jedi Master]] [[Sifo-Dyas]]' lightsaber, which was a gift from Count Dooku. |
||
| + | |||
| + | It has also been rumored that [[Boba Fett]] may have used a lightsaber at one time or another. |
||
| + | |||
| + | [[Jaden Korr]] was able to construct a lightsaber without prior instruction in the Force. |
||
| + | |||
| + | In the [[Tapani Sector]], a subculture of [[saber rake]]s developed who fought duels with a lightsaber-like weapon called a [[lightfoil]]. |
||
==Behind the scenes== |
==Behind the scenes== |
||
| − | [[Image:ST_Lightsaber.jpg|thumb|right| |
+ | [[Image:ST_Lightsaber.jpg|thumb|right|250px|In the early incarnations of the [[Star Wars]] story, lightsabers were quite standard weapons, serving a role similar to that of [[blaster]]s in the films.]] |
| + | |||
* In the early incarnations of the [[Star Wars]] story, lightsabers were not weapons exclusive to the [[Jedi order]]. In fact, they were quite mundane, being used by [[Rebel]] and [[Imperial]] troopers alike. [[George Lucas]] then limited the weapon only to the [[Jedi Knights]], to give the order a unique feel and an arcane quality. |
* In the early incarnations of the [[Star Wars]] story, lightsabers were not weapons exclusive to the [[Jedi order]]. In fact, they were quite mundane, being used by [[Rebel]] and [[Imperial]] troopers alike. [[George Lucas]] then limited the weapon only to the [[Jedi Knights]], to give the order a unique feel and an arcane quality. |
||
* The [[Anakin Skywalker|Anakin]]/[[Luke Skywalker|Luke]] lightsaber was made from a Graflex camera side-attach flash, while the [[Darth Vader]] lightsaber was made from a Heiland flash attachment, in the [[Original Trilogy]]. The handle grips were made of windshield wiper blades, and D-rings were attached to the bottoms of the units so that they could be worn on a belt. |
* The [[Anakin Skywalker|Anakin]]/[[Luke Skywalker|Luke]] lightsaber was made from a Graflex camera side-attach flash, while the [[Darth Vader]] lightsaber was made from a Heiland flash attachment, in the [[Original Trilogy]]. The handle grips were made of windshield wiper blades, and D-rings were attached to the bottoms of the units so that they could be worn on a belt. |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
* The first lightsaber choreography was created by [[Peter Diamond]]. |
* The first lightsaber choreography was created by [[Peter Diamond]]. |
||
| − | * During the [[Prequel Trilogy]], [[Nick Gillard]] was the swordmaster and instructed [[Liam Neeson]], [[Ewan McGregor]], [[Hayden Christensen]] and the other on-screen |
+ | * During the [[Prequel Trilogy]], [[Nick Gillard]] was the swordmaster and instructed [[Liam Neeson]], [[Ewan McGregor]], [[Hayden Christensen]] and the other on-screen duelists through their battle scenes. |
| − | * Due to his age and lack of mobility, [[Christopher Lee]] was replaced by stunt double [[Kyle Rowling]] |
+ | * Due to his advanced age and subsequent lack of mobility, [[Christopher Lee]] was replaced by stunt double [[Kyle Rowling]] for [[Count]] [[Dooku]]'s more complex dueling shots. Lee was able to perform some of the moves, particularly the close-up shots. |
| − | * In '' |
+ | * In ''AOTC'', [[Samuel L. Jackson]] made a special request for his character, Mace Windu, to carry a purple lightsaber. |
| + | *In Revenge of the Sith, George Lucas had Ian Mcdiarmid do most of the close-up shots during his fight between Mace Windu, but doubles were called in for some of the faster, far away shots. The same was done for Samuel L. Jackson as well. However, Ian and Sam had to learn all the lightsaber stunts themselves. |
||
| ⚫ | * In ''[[Star Wars Episode I: The Phantom Menace|The Phantom Menace]]'' and ''Attack of |
||
| ⚫ | * In ''[[Star Wars Episode I: The Phantom Menace|The Phantom Menace]]'' and ''Attack of the Clones'', lightsaber blades were made of resin hilts with a steel rod and were not easily broken, but were easily bent during fighting. However, the lightsabers used in ''[[Revenge of the Sith]]'' were made of fibretube consisting of three layers of fiberglass, three layers of carbon fiber and another layer called texalium, which is essentially aluminum impregnated with glass that gave the weapon more resistance to damage. Though this new hardened saber was more painful to the actors that were constantly being hit when sparring. |
||
| ⚫ | |||
| + | |||
| ⚫ | |||
| + | |||
| + | *In [[Star Wars Insider]] Issue 85, based on [[Ralph McQuarrie]]'s artwork, see above, [[Karen Traviss]] made a story about [[Darth Vader]] called ''A Double Edged Sword'' which had "Stormtrooper Knights" in it. These versions had red lightsabers and were trained by Vader himself. |
||
===Lightsaber or Lightsabre?=== |
===Lightsaber or Lightsabre?=== |
||
| Line 182: | Line 221: | ||
* ''[[Star Wars Episode V: The Empire Strikes Back]]'' |
* ''[[Star Wars Episode V: The Empire Strikes Back]]'' |
||
* ''[[Star Wars Episode VI: Return of the Jedi]]'' |
* ''[[Star Wars Episode VI: Return of the Jedi]]'' |
||
| − | * Almost all |
+ | * Almost all [[Expanded Universe]] stories |
==Sources== |
==Sources== |
||
| Line 191: | Line 230: | ||
*''[[The New Essential Chronology]]'' |
*''[[The New Essential Chronology]]'' |
||
*''[[StarWars.com]] [[Databank]]'' |
*''[[StarWars.com]] [[Databank]]'' |
||
| + | *''[[Fightsaber: Jedi Lightsaber Combat]]'' - ''[[Star Wars Insider 62]]'' |
||
==See also== |
==See also== |
||
*[[Gallery of lightsaber hilts]] |
*[[Gallery of lightsaber hilts]] |
||
*[[Gallery of lightsaber battles]] |
*[[Gallery of lightsaber battles]] |
||
| − | |||
*[[Lightsaber combat]] |
*[[Lightsaber combat]] |
||
==External links== |
==External links== |
||
| Line 202: | Line 241: | ||
*{{databank|category=technology|subject=sithlightsaber|text=Sith lightsaber}} |
*{{databank|category=technology|subject=sithlightsaber|text=Sith lightsaber}} |
||
*{{WP|Lightsaber}} |
*{{WP|Lightsaber}} |
||
| + | *{{CUSWE|url=http://www.theforce.net/swenc/newdescr.asp?search=14943&tab=d|text={{PAGENAME}}}} |
||
| + | *[http://www.thelightsaber.com/ Luukesabers] |
||
| + | *[http://forums.swordforum.com Sword Forum International] |
||
[[Category:Jedi]] |
[[Category:Jedi]] |
||
| Line 208: | Line 250: | ||
[[Category:Technology]] |
[[Category:Technology]] |
||
[[Category:Weapons]] |
[[Category:Weapons]] |
||
| − | *Luukesabers: The Ultimate Lightsaber Site - http://www.thelightsaber.com/ |
||
| − | |||
| − | *Sword Forum International: http://forums.swordforum.com (search term "lightsaber") |
||
Revision as of 20:01, 19 March 2006
- "This is the weapon of a Jedi Knight. Not as clumsy or as random as a blaster. An elegant weapon from a more civilized age."
- ―Obi-Wan Kenobi
Ben Kenobi introduces Luke Skywalker to the elegance of a lightsaber.
The lightsaber (less formally, the laser sword) was more than just the distinctive weapon of the Jedi; it was a segment of the order's history and its ultimate symbol for millennia. There could be no Jedi without a lightsaber and no lightsaber without a Jedi in the eyes of galactic denizens. Over the years, it came to be associated with gallantry and elegance otherwise lost in an age of blasters. Jedi traditionally constructed their own lightsaber as part of their training. To carry a lightsaber was an example of incredible skill and confidence, dexterity and attuning to the Force. Since its plasma blade was essentially weightless, the weapon produced a gyroscopic effect, and so it was very difficult to handle safely. Yet this made the weapon ideal for Force-sensitive users whose ability to predict the various energy pulsations through the force allowed him or her to compensate for them. They also served as a means by which a Jedi's focus was attuned to the force during combat. For the same reason, it was also a very quick weapon, and superhuman reaction times were necessary to capitalize fully on this advantage. Only a handful of non-Force-sensitives have been known to master it, and none of them has ever presented a challenge for a fully-trained Jedi, save the lethally effective General Grievous.
History
Odan-Urr wielding his archaic lightsaber.
Since the formation of the Tython Jedi after the Force Wars circa 25,000 BBY, ceremonial weapons have been an integral part of the Jedi. The first Knights used alloy swords imbued with elements of the Force through a ritual called the Jedi Forge. Combining advanced offworld technology with the forging ritual, the Jedi learned to "freeze" a laser beam, the basis of technology that would lead the Jedi toward the design of future lightsabers.
By the time of the Duinuogwuin Contention around 15,500 BBY, their studies in energy technology yielded success. The Jedi learned how to generate a focused beam of energy that arced circumferentially back to its source, creating the first portable high-energy blade. These preliminary lightsabers inefficiently guzzled power from a belt-mounted power supply and were terribly unstable. They could only be used for brief durations before overheating. Because of these flaws in design, the first lightsabers were little more than ceremonial appurtenance to the Jedi apparel, seldom worn, much less utilized.
The shortfalls that plagued the weapon's previous designs were corrected through the ages, so that by the Hundred-Year Darkness of 7,000 BBY the cumbersome and rare siege weapons of previous years gave way to elegant and commonly used lightsabers. Power output continued to be an issue, however, and required the continued use of an external power pack worn on the belt. The power cable from belt to blade tended to restrict the Jedi's movement in combat, but the newly stable blade granted them a superior advantage in hand-to-hand combat against heavily armored foes.
It wasn't until after the Great Hyperspace War that the modern lightsaber was designed. The restricting power cable and external power pack of old designs were replaced with internal power components by the time of the Gank Massacres in 4,800 BBY. An internal superconductor was introduced which transferred the returning looped energy from the negative-charged flux aperture back into an internal power cell. With this modification, the power cell would only expend power when the energy loop was broken (when the lightsaber blade cut into something), at last solving the ages-old power supply problem.
After the Great Jedi Purge, lightsabers became rare relics prized by some collectors. In the years of Palpatine's Empire, some lightsabers found their way onto the black market and were sold for untold amounts. They only truly re-entered the galactic scene with the rise of the New Jedi Order, thanks to the teachings of Luke Skywalker and the re-discovery of ancient Jedi holocrons and teachings believed lost after the Jedi Purges.
After the fall of Palpatine and the re-emergence of the Jedi, other groups of Force-users like Desann's Reborn and the Disciples of Ragnos mass-produced lightsabers to arm their fast-growing legions. By contrast, the New Jedi maintained the old ways and rituals, using their connections with the Force to personally construct their own sabers.
Lightsaber colors
The color of a lightsaber blade was heavily dependent on the crystal used in its construction. For the Jedi, these crystals came in many colors and were extracted from natural deposits. Sith, however, made use of synth-crystals to power their weapons, which resulted in Sith blades being almost uniformly red. It should be noted that synthetic crystals do not always result in red blades, since Luke Skywalker's synthetic crystals resulted in a green blade. Jedi have been known to produce blades that are red or approaching that color (such as purple), but perhaps due to the force of tradition, the Jedi Order typically avoided any colors that might associate them with the Sith. Despite this, a small number of Jedi (such as Adi Gallia during the time of the Clone Wars) used a red bladed lightsaber.
Ancient Jedi wielded blades of many colors; blue, green and red, as well as purple, orange, silver, turquoise, pink, bronze, yellow, viridian, and possibly white and gold, among others; the full variety and extent of focusing gems, and consequently, of colors, is unknown.
By the time of Battle of Naboo, however, the Jedi used the caves of Ilum as their primary source of lightsaber crystals. These caves were rich in green and blue crystals, explaining the absence - with the exception of Mace Windu's and Plo Koon's blades (purple and yellow respectively) - of alternate colors among the Jedi ranks during this period. During the Clone Wars, major portions of the Ilum caves were destroyed by the Confederacy of Independent Systems. The Empire destroyed crystals on an even larger scale after the war. Bereft of these resources, the Jedi of Luke Skywalker's Order were again forced to scour the galaxy for usable crystals, creating a resurgence in more varied blades. One lightsaber in particular, created by the Jedi student Gantoris, was violet with patterns of rainbow light rippling across its white core.
Dooku duels Obi-Wan Kenobi and Anakin Skywalker aboard Invisible Hand.
The 'synthetic' red blade producing crystals favored by the Sith can create a somewhat more powerful blade than blue or green crystals, but are not as pure due to their artificial nature and can thus be undesirable as the focus of a lightsaber. Often the Sith Master would craft the crystal and gift it to his apprentice. Despite the differences in color, the function of the different colored blades is the same. Once techniques of synthesizing crystals became more well known, the restrictions on color became less of a concern, except for matters of personal taste or political statement. Various "Dark Jedi" not associated with the extinct Sith Order often retain the colors used as Jedi, though some continue to choose red for symbolic reasons. Plenty of examples exist, however, of Dark Side users who did not use red blades, and even those who were not Dark Siders who used red blades with no ill effects. This has lead many to assume that the color is merely a symbolic consideration, depending on the user.
Some have speculated that the red lightsabers are actually a product of the influence of the Dark Side of the Force. It is alleged that somehow the one constructing the saber actually "infuses" some aspect of the Dark Side into the device itself, causing the blade to change color. This might also explain why Dark Side users so often switch to red after turning. However such a notion could be explained away as superstition, and speculation based on the common practice of the Sith using red blades (after all, Exar Kun, who was one of the most feared Sith Lords of all time, wielded a double-bladed blue lightsaber). Those who embrace the Dark Side may simply wish to imitate the Sith traditions by choosing a color favored by them. That such misinformation could be spread among the general public would give the Jedi one more reason not to associate with them by choosing colors other than red.
This being noted, there were advantages and disadvantages to Sith crystals. As mentioned before, they could actually produce a blade stronger than traditional crystals, which possessed the possibility to "break the blade" of other sabers by overloading the energy matrix and instantly burning out the enemy's weapon. Although a rare occurance, it was still common knowledge and a terrifying proposition in duels. Additionally, Sith blades also seemed to be less maneuverable than their Jedi counterparts.
There is some controversy surrounding what exactly produces blade color in a lightsaber. Is it purely based on the type or color of crystal, the focusing mechanism, power level, "tuning" or some other aspect? Clearly, the crystal has some effect, but it may not be the sole factor in determining the color. It can be difficult to say since so much lore has become tied up in the lightsaber over the centuries and so much information distorted or lost due to the influence of the Empire and the Sith.
Lightsaber types
- Archaic Lightsaber — This is the earliest-known type of laser sword, developed as a siege weapon. It required a separate power pack to work, which was often worn on the back, and later, as technology simplified power packs, a belt-worn power source. The moves that could be performed with an archaic lightsaber were more limited than those that could be achieved with a modern laser sword because of the cord that connected the hilt to its power source.
- Crystal Lightsaber — The general term used for any standard lightsaber with focusing crystals. After the miniaturization of power packs, this was the standard weapon for millennia. It typically consisted of a core crystal which determined color, and two extra crystal chambers which could enhance and personalize the saber to the Jedi that used it. There have been instances of multi-colored blades; however this was not a result of the secondary crystals. It is unknown what exactly caused this color variation, but it was most likely a result of the core crystal itself.
Asajj Ventress whirls her fibre-cord linked curve hilted lightsabers.
- Fiber-cord linked Lightsaber — A form of dual-blade lightsaber. They were link together with a fiber cord, and were used like nunchaku. Asajj Ventress modified her paired lightsabers into a fiber-corded pair on some occasions.
- Curve-hilted Lightsaber — A standard design during the prime of Form II lightsaber combat, curved hilts allowed more spinning action during blade-to-blade duels. It was also more complex and gave the maker more of a challenge in aligning its crystals. This lightsaber was known to be used by Count Dooku, his apprentice Komari Vosa, and later his Dark Side Adept Asajj Ventress. Asajj Ventress's lightsabers could combine to make a curved double blade. This was also known as paired lightsabers.
Darth Maul wielding his double-bladed lightsaber.
- Double-bladed lightsaber— also Saberstaff or Lightstaff — A long-hilted version of the standard lightsaber. Each blade could be activated independently of one another or simultaneously. It could be one hilt or two normal lightsabers attached together. This was often even more dangerous to the untrained wielder than to the opponent. It came to be known as a Sith lightsaber because it was preferred by Sith and was possibly invented by Dark Lord of the Sith Exar Kun, whose lightsaber was both double-bladed and dual-phase. This made his personal style of lightsaber combat very complex, as he would vary the strength and length of either blade independently; sometimes letting the opponent's blade pass right through his, sometimes blocking.
Darth Maul was inspired by Kun and created his own saber staff which he used with amazing prowess. Asajj Ventress would connect her two curve-hilted lightsabers together to form a unique type of saber staff termed fiber-cord linked lightsabers. It was also temporarily popularized by the Jedi during the Mandalorian Wars, where it was more useful then the standard lightsaber when fighting the extremely skilled and powerful Mandalorians.
Darth Sidious's electrum lightsaber.
- Electrum Lightsaber — A lightsaber with a hilt forged from gold-like electrum was often called an "electrum lightsaber". The electrum finish gave the lightsaber a majestic, regal appearance and in the last days of the Old Jedi Order, golden and electrum lightsabers were reserved for members of the Jedi Council. Mace Windu's and Darth Sidious' lightsabers are examples of such kind.
- Dual-phase Lightsaber — Multiple crystals allowed the user to switch between two blade lengths in battle with the dual-phase saber. It was a quite common lightsaber type both in the Old Jedi Order and the New Jedi Order. Anakin Skywalker/Darth Vader wielded such a lightsaber, as did, for example, Micah Giett, Gantoris, and Corran Horn.
- Great Lightsaber or Lightclub — Special focusing crystals and power systems enabled this rare lightsaber to project a blade up to 3 meters in length. Gorc, a mutated Gamorrean Dark Jedi, used such a weapon.
Yoda wielding his short lightsaber.
- Short Lightsaber — The short lightsaber employed a shorter blade than the more common lightsaber. The smaller blade allowed for easier use in combat by those Jedi that were smaller in stature, such as Jedi Masters Yoda and Tsui Choi. A longer, though still short, variation was often used by practitioners of Form X: Niman / Jar'Kai.
- Forked lightsaber — This form of twin-bladed lightsaber was essentially a regular crystal lightsaber with a second emitter coming out of the hilt at a 45 degree angle to the axis of the lightsaber. The hilt was also slightly curved. One of the only known Jedi Knights to use this lightsaber style fought in the Clone Wars at the Battle of Parcelus Minor.
- Lightdagger — The lightdagger was a lightsaber with a shorter blade and could be used as an assault knife. Luke Skywalker constructed his own lightdaggers after the Battle of Endor. Because this type of lightsaber had a very small blade, it could be easily used by non-Force-sensitives. Black Sun vigo Darnada's bodyguard, Sinya, carried two baton-style lightdaggers. Master Sora Bulq during the Clone Wars era was known to carry a lightdagger which he used in combat with Senior Jedi Master Mace Windu.
Githany fighting Kiel Charny with her lightwhip.
- Lightwhip — The lightwhip was an exotic variation of the lightsaber that only specially trained Jedi could wield. It could either have a solid core of cortosis or other lightsaber-resistant minerals (see below) or it could be a blade of pure energy sheathed in deadly energy. Like the lightsaber, it emitted a coherent beam of energy, but unlike the lightsaber's, it was long and flexible to be wielded like a whip. It is believed this saber is the only one that functions just as well in water as on land, although for some reason it wasn't flexible underwater and appeared and functioned like a normal lightsaber when submerged. Known users of the lightwhip included Jedi Kit Fisto, Dark Jedi Lumiya, the Sith Lady Githany and the Black Sun Vigo Xist.
- Training lightsabers — The training lightsaber was used by Jedi Younglings, to practice lightsaber combat. While non-lethal, contact with the blade could cause bruising and even minor burns. This type of lightsaber was often used in conjunction with the basic Shii-Cho style of lightsaber combat.
Cutting power
Qui-Gon Jinn cuts through a blast door in a Trade Federation starship.
Lightsaber blades do not radiate heat unless they come into contact with something. Then the intensely hot blade can cut through almost any substance when appropriate force is applied. A few notable exceptions do exist however:
- Cortosis ore: A unique substance able to shut down a lightsaber upon contact. Some types of Cortosis armor merely resist a blade rather than shorting it out. However, some people think this to be somewhat inaccurate. Cortosis Battle Droids were used during an attack on the Jedi Temple. A Cortosis blade was also used against an attack on Darth Vader after Order 66.
- "Armorweave" is a cloth that is said to give some resistance to lightsabers, though such protection afforded is obviously limited by the thickness and reinforcement of the material (just as a "bullet proof vest" is not impenetrable to all bullets).
- Phrik alloy: Used in electrostaffs, Palpatine's lightsaber and Dark Trooper armor. General Grievous's MagnaGuards use electrostaffs as their weapon.
- An unnamed metal superconductor used for ship armor hundreds of years before the Galactic Empire.
- The alchemically altered Sith Sword used by the original Sith Empire.
- Mandalorian iron: A metal used by the Mandalorian warriors.
- Yuuzhan Vong bio-engineered weaponry and armor, such as the amphistaff. However, weaknesses were soon found in the armor and staff.
- Certain types of energy shields.
- Other dense or resistant materials, like the armor worn by Lord Darth Vader and the hulls of starfighters during the Clone Wars. However, Vader's armor could be cut or broken by lightsabers.
Some creatures, such as lava dragons, were possesed of natural armour that reflected the blade much as the blade reflected a blaster bolt.
Methods of use
See also: lightsaber combat
Kit Fisto's Shii-Cho in use against Darth Sidious's Ataru.
The lightsaber was a very versatile weapon, owing to its unique lightness and omni-directional cutting ability. It could be wielded one-handed with ease, though Jedi were routinely trained in using the saber with both and either hands, so as to be prepared for all situations. Early in the weapon's history, when the Sith were numerous, the art of lightsaber dueling flourished. In later periods though, only rarely would Jedi face an adversary with a weapon capable of deflecting a lightsaber. Using Jedi prescience, a lightsaber wielder could anticipate a blaster bolt's path and deflect it with his or her lightsaber.
Several styles or "forms" of lightsaber combat were developed over the thousands of years that the lightsaber served the Jedi as their primary weapon; some involved dual-wielded lightsabers, and sometimes even double-bladed lightsabers.
Forms:
Example Users: Kit Fisto, Jedi Younglings
Example Users: Obi-Wan Kenobi
Example Users: Yoda, Darth Sidious, Qui-Gon Jinn
Example Users: Anakin Skywalker, Plo Koon
Example Users: Coleman Trebor
Example Users: Mace Windu, Depa Billaba, Sora Bulq, Quinlan Vos, Darth Maul
Example Users: Obi-Wan Kenobi
- Form IX: Shien
Example Users: Adi Gallia
Example Users: Boc
- A Force ability known as Saber throw
Example Users: Darth Vader, Yoda, Anakin Skywalker
Construction details
- "The crystal is the heart of the blade. The heart is the crystal of the Jedi. The Jedi is the crystal of the Force. The Force is the blade of the heart. All are intertwined: the crystal, the blade, the Jedi. You are one."
- ―Luminara Unduli, during a lightsaber construction ceremony
The lightsaber was made up of a short polished metallic cylindrical tube (30 centimeters) that emitted a beam of a plasma-like substance, or plasmoid.
A cutaway of Luke Skywalker's lightsaber from A New Hope.
All lightsabers contain some common basic components:
- A handgrip
- An activation stud plate
- A safety switch
- An emitter matrix
- A lens assembly (focusing crystal)
- A power cell
- A power conduit
- A recharge socket
The focusing crystal was the central component of the lightsaber. The crystals were wired to the diatium power cell, which acted like an energy source for the lightsaber.
During the Great Sith War epoch, many lightsabers were manufactured using kunda stones, a natural geologic formation from the planet Kadril which boast numerous practical applications in medicine and communications. They could also be combined with normal lightsaber lenses to produce a broader, yet still-focused, beam than is usual.
Perhaps the most unusual lightsaber design belonged to Roblio Darté. His lightsaber was constructed like a regular lightsaber except for one thing. Aside from the main blade of the weapon, there was a smaller, second blade jutting out at an angle from the hilt.
The typical design of the hilt was a straight tube. Count Dooku however, preferred a curved hilt, which would fit his Form II lightsaber fighting style.
The knowledge of lightsaber construction largely disappeared during the extermination of the Jedi, but Luke Skywalker found the records and the materials he needed to construct his first lightsaber in Obi-Wan Kenobi's hut on Tatooine. Lightsaber construction included the use of the Force to bind the components of a lightsaber together at a molecular or lower level, which enabled the closed loop design to operate with near-perfect efficiency.
Sometimes certain events necessitated a change in a Jedi's preferred weapon. A Jedi would modify the lightsaber or construct a new one to suit the demands of the situation at hand, such as with Mace Windu and his lightsaber after the Battle of Naboo.
On certain occasions, the Jedi would have to build a provisional lightsaber. This was the case of Corran Horn who, shortly after he had first left the New Jedi Order to search for his lost wife, build a lightsaber from the handle of a speederbike. While functioning reasonably well, the lightsaber would now and again flicker and switch off by itself due to a design flaw by Horn.
Concordance of Fealty
Concordance of Fealty between Master Eeth Koth and Master Mace Windu.
- "Master Eeth Koth, I have something to return to you. It is a product of your own hands which you once entrusted to mine. In returning this lightsaber, I return your trust."
- — Master Mace Windu
The Jedi tradition of entrusting one's lightsaber to a fellow member of the order was called the Concordance of Fealty. This exchange represented a serious, even sacred bond. The exchange represented the establishment of a reciprocal, Master-less learning relationship.
Users
Although the lightsaber was used primarily by the Jedi and Sith Force users, several non-Force users were known to have used a lightsaber:
Thall Joben once used a green lightsaber, as he explained to his droid C-3PO that he once did some work for someone who owned a speeder, but they left the speeder with him and never reclaimed it; the lightsaber was one of the things left in the speeder by the person. It is unknown if this customer of Thall's was actually a Jedi or was simply someone who killed a Jedi or a Sith and took the lightsaber from them. Most likely, it was the latter, as most Jedi and Sith do not simply forget their lightsabers.
Han Solo used Luke Skywalker's (formerly Anakin Skywalker's) lightsaber after he rescued Luke from a snowstorm on Hoth. Solo used the lightsaber to slice open the body of a dead Tauntaun, whose insides he then used to keep Luke warm while he constructed a proper shelter for the both of them.
Mara Jade's lightsaber was also used by Han to chop down Killiks shortly before the Swarm War. When he briefly lost it, Tarfang, an Ewok smuggler, viciously wielded the lightsaber to dice up Kiliks to great effect.
Anja Gallandro, daughter of the deceased bounty hunter Gallandro, wielded an acid-yellow lightsaber of particularly ancient make in service to the Black Sun figure known as Czethros.
Darca Nyl, an ex-mercenary, used the green lightsaber of a dead Jedi during his pursuit of Lycan. Though he rarely used it in battle, it often gave him the advantage of being able to pass for a true Jedi. It was destroyed along with Lycan in a trap laid by Darca in a Force-sensitive cave on Molavar.
Suvam Tan the eccentric Rodian inventor was such a mechanical genius that he managed to construct his own lightsaber from scratch despite not having any Force sensitivity. It's unknown whether or not Suvam was actually able to use his lightsaber, though.
General Grievous properly the most famous user of lightsabers without the force would be who used lightsabers during the Clone Wars, all of which were taken from Jedi he had either killed or defeated in battle, except for Jedi Master Sifo-Dyas' lightsaber, which was a gift from Count Dooku.
It has also been rumored that Boba Fett may have used a lightsaber at one time or another.
Jaden Korr was able to construct a lightsaber without prior instruction in the Force.
In the Tapani Sector, a subculture of saber rakes developed who fought duels with a lightsaber-like weapon called a lightfoil.
Behind the scenes
In the early incarnations of the Star Wars story, lightsabers were quite standard weapons, serving a role similar to that of blasters in the films.
- In the early incarnations of the Star Wars story, lightsabers were not weapons exclusive to the Jedi order. In fact, they were quite mundane, being used by Rebel and Imperial troopers alike. George Lucas then limited the weapon only to the Jedi Knights, to give the order a unique feel and an arcane quality.
- The Anakin/Luke lightsaber was made from a Graflex camera side-attach flash, while the Darth Vader lightsaber was made from a Heiland flash attachment, in the Original Trilogy. The handle grips were made of windshield wiper blades, and D-rings were attached to the bottoms of the units so that they could be worn on a belt.
Luke Skywalker wielding a blue lightsaber in an early Return of the Jedi trailer.
- During the initial editing of Star Wars Episode VI: Return of the Jedi, Luke's lightsaber was colored blue. However, against the desert blue sky environment, the decision was made to change it to green for a better visual effect, hence the birth of the green lightsaber.
- In the Original Trilogy, the blades were made from carbon rods and were easily broken during battle.
- The first lightsaber choreography was created by Peter Diamond.
- During the Prequel Trilogy, Nick Gillard was the swordmaster and instructed Liam Neeson, Ewan McGregor, Hayden Christensen and the other on-screen duelists through their battle scenes.
- Due to his advanced age and subsequent lack of mobility, Christopher Lee was replaced by stunt double Kyle Rowling for Count Dooku's more complex dueling shots. Lee was able to perform some of the moves, particularly the close-up shots.
- In AOTC, Samuel L. Jackson made a special request for his character, Mace Windu, to carry a purple lightsaber.
- In Revenge of the Sith, George Lucas had Ian Mcdiarmid do most of the close-up shots during his fight between Mace Windu, but doubles were called in for some of the faster, far away shots. The same was done for Samuel L. Jackson as well. However, Ian and Sam had to learn all the lightsaber stunts themselves.
- In The Phantom Menace and Attack of the Clones, lightsaber blades were made of resin hilts with a steel rod and were not easily broken, but were easily bent during fighting. However, the lightsabers used in Revenge of the Sith were made of fibretube consisting of three layers of fiberglass, three layers of carbon fiber and another layer called texalium, which is essentially aluminum impregnated with glass that gave the weapon more resistance to damage. Though this new hardened saber was more painful to the actors that were constantly being hit when sparring.
- In the video game Jedi Academy, an option is provided that makes a player's lightsaber change to red as soon as that player turns to the dark side.
- In Star Wars Insider Issue 85, based on Ralph McQuarrie's artwork, see above, Karen Traviss made a story about Darth Vader called A Double Edged Sword which had "Stormtrooper Knights" in it. These versions had red lightsabers and were trained by Vader himself.
Lightsaber or Lightsabre?
The word "saber" is usually spelled "sabre" in the United Kingdom and other Commonwealth countries, though "saber" is more common in the United States. As most Star Wars materials, including the film novelizations and the published screenplays, are first published in the United States, the spelling "lightsaber" is used in the original printings of most canonical sources. Thus, Wookieepedia uses "lightsaber" for consistency. It should of course be realized, that per suspension of disbelief, the fictional Star Wars galaxy is dominated not by English, but by "Basic" and the so-called "Aurebesh" (or rather one similar) alphabet. These things are "translated for the benefit of the audience" in the literature and films.
Appearances
- Star Wars Episode I: The Phantom Menace
- Star Wars Episode II: Attack of the Clones
- Star Wars Episode III: Revenge of the Sith
- Star Wars Episode IV: A New Hope (First appearance)
- Star Wars Episode V: The Empire Strikes Back
- Star Wars Episode VI: Return of the Jedi
- Almost all Expanded Universe stories
Sources
- Episode I: The Visual Dictionary
- Attack of the Clones: The Visual Dictionary
- Power of the Jedi Sourcebook
- The New Essential Chronology
- StarWars.com Databank
- Fightsaber: Jedi Lightsaber Combat - Star Wars Insider 62
See also
- Gallery of lightsaber hilts
- Gallery of lightsaber battles
- Lightsaber combat
External links
[1] in the Databank (backup link () not verified!)- [2] in the Databank (backup link () not verified!)
- Lightsaber on Wikipedia
- Template:CUSWE
- Luukesabers
- Sword Forum International
