FANDOM


TPM-CGYoda

Master Qui-Gon, more to say, have you?

It is requested that this article, or a section of this article, be expanded.

See the request on the listing or on this article's talk page. Once the improvements have been completed, you may remove this notice and the page's listing.

"Kylo Ren. […] That's what his army called him. He was dressed in black, carried a "laser sword" like in the old Jedi stories."
Eila, to Kazuda Xiono[src]

Kylo Ren's lightsaber was a crossguard lightsaber wielded by Kylo Ren, Supreme Leader of the First Order and master of the Knights of Ren. The lightsaber was previously Ben Solo's lightsaber, constructed by Ren in his life as Ben Solo while training as a Jedi Padawan under his uncle, the Jedi Master Luke Skywalker. Originally the weapon had a blue blade, but after his destruction of Luke Skywalker's Jedi temple and fall to the dark side in 28 ABY, Ren modified it into one with a red blade. The modified lightsaber incorporated a crossguard hilt based on an ancient design dating back to the Great Scourge of Malachor and contained a cracked Kyber crystal, requiring it to have lateral vents on either side of the handle in order to divert the extra heat generated by the crystal.

During the cold war, Ren used the lightsaber to strike down Lor San Tekka, a member of the Church of the Force. When his father, Han Solo beseeched him to leave the First Order, Ren ignited the crossguard lightsaber through Solo's torso in an act of patricide. He later dueled the former stormtrooper known as Finn, and the Force-sensitive scavenger Rey, though he lost to the latter.

After recovering from his defeat on Starkiller Base, Ren assassinated his dark side master, Supreme Leader Snoke, and fought alongside Rey against the Elite Praetorian Guard. He killed several guards using his crossguard lightsaber before taking control of the First Order as Snoke's successor. On Crait, he was confronted by his uncle and former mentor, Jedi Master Luke Skywalker, and attempted to strike him down in battle. However, Ren's lightsaber was ineffective against his opponent as Skywalker had only projected his appearance on Crait whereas his physical form was still on Ahch-To.

The next year, Kylo Ren continued to use his lightsaber until he faced Rey on the remains of the second Death Star on the ocean moon of Kef Bir. After being saved by Rey from dying at her hands, Ren experienced a Force vision with his father Han, who insisted him to give up the dark side of the Force and reminded that he still loved him. Again Ben Solo and no longer Kylo Ren, Solo threw Kylo Ren's lightsaber towards the horizon where it disappeared into the depths of Kef Bir's oceans.

DescriptionEdit

Kylo Ren confronts Rey and Finn

Kylo Ren's crossguard lightsaber produced a plasma stream of three channels, with the quillons emerging after the main blade ignited.

Ben Solo's Jedi lightsaber originally had a blue colored blade. Like all Jedi lightsabers, Solo's had a kyber crystal at its core as a power source,[8] and contained a diatium power cell cradled within the grip as an additional power source. The blade was ignited using a sliding activation switch located near the top of the hilt.[1]

Kylo Ren's crossguard lightsaber was modeled on weapons that were used in the Great Scourge of Malachor, an event that occurred millenia before the New Republic Era.[3] Despite its ancient design, Ren's lightsaber contained modern components within it.[2] The lightsaber was crudely assembled and its unstable condition was evidence of Ren's inexperience in constructing such a weapon.[9] It was built around a dangerously flawed kyber crystal; therefore, the lightsaber relied on its lateral vents to prevent the cracked crystal from overloading. Its focusing crystal activators served to split the lightsaber's red-yellow[6] plasma stream into three channels, creating the crossguard blades, or quillons, which appeared after the ignition of the main blade.[3] The lateral vents, from which the quillons emerged, diverted the extra heat produced by the crystal to either side of the hilt, giving the crossguard lightsaber an unstable and serrated appearance.[2] Though he was capable of repairing his lightsaber, Ren favored its unstable and volatile nature.[1] Its partially exposed inner workings allowed for easy modifications and upkeep.[10]

HistoryEdit

ConstructionEdit

"I'm being torn apart. I want to be free of this pain. I know what I have to do but I don't know if I have the strength to do it. Will you help me?"
"Yes. Anything."
―Kylo Ren and Han Solo[src]
Decisive Blow SoR

Ren's lightsaber was modeled on an ancient design dating back to the Great Scourge of Malachor.

At some point between 15 ABY and 25 ABY[4] Ben Solo constructed his lightsaber[3] while training as a Jedi Padawan under his uncle, the Jedi Master Luke Skywalker,[1] as was the tradition of the Jedi Order.[11] After Solo fell to the dark side and adopted the name of Kylo Ren as master of the Knights of Ren, he continued to use the same weapon, modifying it to suit his new preferences as a dark Force-user.[1] The modified crossguard lightsaber would serve as his weapon throughout his time as the dark apprentice of Supreme Leader Snoke,[7] as well as afterward as Snoke's successor.[5]

UsageEdit

The weapon of a JediEdit

Ben Solo used his lightsaber during his training with his uncle Luke Skywalker and wielded it during his travels with Skywalker throughout the galaxy,[1] including one excursion to the Jedi outpost on Elphrona that brought Solo and Skywalker face to face with the Knights of Ren. During the confrontation, the Jedi Master Luke Skywalker fought the six Knights of Ren and their leader Ren, keeping his nephew and their companion Lor San Tekka from harm. Solo took out and ignited his own lightsaber, in preparation to join the fight, but Skywalker and Ren diffused the situation through other means.[12]

BenSolosLightsaber-TROSVD

Ben Solo's Jedi lightsaber

One fateful night, Solo woke to see Skywalker, fearful of the dark side within him, standing over him with his own lightsaber raised. Fearing his uncle had intended to kill him, Solo immediately used his lightsaber to defend himself. The brief duel that ensued concluded with Solo using the Force to destroy the structure around them and knocking Skywalker unconscious.[5] Believing his uncle dead, Solo left the ruins of his room and brandished his still-ignited lightsaber in despair while crying out, wondering why Skywalker would betray him. Consumed by his emotions, a great storm brewed and destroyed the temple, killing the other students. When his fellow Jedi Voe, Hennix and Tai arrived from off-world to find Ben Solo alone before the burning Jedi temple, they confronted him. Though the other three Jedi fought with their own lightsabers, Solo left his weapon clipped to his belt and instead warded off his opponents with only his Force powers. He fled to Snoke,[13] who became his new master and eventually took up the name Kylo Ren and modified his Jedi lightsaber into an unstable, red crossguard lightsaber to suit his new identity.[1]

Search for SkywalkerEdit

During the conflict between the First Order and the Resistance, the dark knight used his crossguard lightsaber to kill Lor San Tekka, a member of the Church of the Force. Ren later used his lightsaber aboard the Finalizer, in a rage-induced temper tantrum —regarding a report about Finn's involvement in BB-8's escape from Jakku, destroying a computer terminal.[7]

During her time on Takodana, the Scavenger Rey discovered Luke Skywalker's old lightsaber, that once belonged to Ren's grandfather Anakin Skywalker, in Maz Kanata's castle, where she had a Force vision. During the vision, she saw Ren using his lightsaber to cut down a clan leader. Ren later used his lightsaber during the Battle of Takodana to deflect blaster bolts fired at him by Rey.[7]

Kylo Ren duels Rey

Ren used his lightsaber in a duel against Rey and Finn.

Ren used his lightsaber again during the Battle of Starkiller Base. First, on a interrogation chair, when he had another a rage-induced temper tantrum, after finding out that Rey had escaped custody.[7]

He also used it on his own father, Han Solo. It later crossed blades with the Skywalker lightsaber. Although he defeated and injured the former stormtrooper Finn in a brief duel, he was in turn defeated by Rey, who successfully channeled the Force within herself to fight back, striking Ren's lightsaber and knocking it from his hand.[7][14]

The SupremacyEdit

Despite the weapon being damaged, Ren repaired the weapon, adding a sleeker black casing to it. While in the presence of Snoke's Elite Praetorian Guards, the lightsaber came into the possession of Rey, who summoned it from Ren's side in an attempt to fight Snoke and his bodyguards. In spite of her efforts, Rey was telekinetically disarmed by Snoke, who commanded his apprentice to kill the aspiring Jedi. Ren used the moment as an opportunity to assassinate Snoke by cutting him in half with the Skywalker lightsaber. Activating his own lightsaber, Kylo Ren fought alongside Rey against the Praetorians, all of whom perished while attempting to avenge their slain leader.[5]

CraitEdit

Luke Duels Kylo Ren

Ren used his lightsaber to duel his uncle and former Master Luke Skywalker on Crait.

After the battle in Snoke's throne room, Ren assumed the title of Supreme Leader and brought the forces of the First Order to the planet Crait, where he attempted to fight his uncle Luke Skywalker, only to discover that he was fighting a Force projection of the Jedi Master. As a result, the Resistance was able to escape before Ren could destroy them.[5]

Kef BirEdit

"I know what I have to do, but I don't know if I have the strength to do it."
"You do."
―Kylo Ren's memory of his father, Han Solo, wills him to cast aside his lightsaber[src]

Following his defeat on Crait, Ren continued to wield the lightsaber as he worked to consolidate the First Order's power. Whispers of the return of the long dead Galactic Emperor and Sith Lord Darth Sidious incited Ren to locate the Emperor and eliminate the threat to his power. These same rumors inspired his Jedi rival Rey and her allies to do to same and the pair's concurrent quests and Force-bond brought them to the ocean moon of Kef Bir in the Endor system. Kef Bir was the site of the ruins of the second Death Star and the location of a Sith wayfinder that could lead the way to the Emperor's location.[15]

Kylo Ren IX TROS

Kylo Ren wielded his lightsaber in a final duel with Rey on Kef Bir.

On Kef Bir, they faced each other in a final confrontation, Ren bearing his lightsaber and Rey the repaired Skywalker lightsaber. He gained the upper hand and was prepared to strike her down, but as they dueled his dying mother Leia Organa reached out to him through the Force, distracting him from making the killing blow. Rey seized the opportunity and impaled Ren with his own weapon, but after sensing Organa's death, healed his grievous wound before departing. As Ren stood alone on the battle station after the duel, he was overcome by a memory of his deceased father Han Solo, who spoke to him and called to his son to change, much as he had in their fateful confrontation on Starkiller Base. Touched by the love of his mother and father and the compassion shown by Rey in healing him, Kylo Ren ceased to exist and Ben Solo was reborn. Having no further use of the weapon, Ben threw the lightsaber towards the horizon so it could sink into the depths of Kef Bir's oceans.[15]

Behind the scenesEdit

Kylo Ren's lightsaber first appeared in Star Wars canon in the 2015 film Star Wars: Episode VII The Force Awakens.[7] The introduction of the lightsaber was well-publicized in the media, including on The Colbert Report and @Midnight on Comedy Central. The lightsaber was also the subject of a number of pieces of fan art released in the days after the films first teaser trailer premiered.[16]

The lightsaber's original form as Ben Solo's lightsaber first appeared in a flashback scene in the 2017 film Star Wars: Episode VIII The Last Jedi, the sequel to Episode VII.[5] Though similar in appearance to the weapon later used by Solo as Kylo Ren, it was not confirmed to be the same lightsaber until the 2019 reference book Star Wars: The Rise of Skywalker: The Visual Dictionary by Pablo Hidalgo.[1]

Lucasfilm's creative art manager, Phil Szostak, states in a post on Twitter that the lateral beams emanating from Luke Skywalker's lightsaber in Tom Jung's 1977 posters for the original Star Wars is what inspired the crossguard design of Kylo Ren's lightsaber for The Force Awakens.[17]

AppearancesEdit

Non-canon appearancesEdit

SourcesEdit

Wiki-shrinkable
Wookieepedia has 188 images related to Kylo Ren's lightsaber.

Notes and referencesEdit

  1. 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 Star Wars: The Rise of Skywalker: The Visual Dictionary
  2. 2.0 2.1 2.2 Star Wars: The Force Awakens: The Visual Dictionary
  3. 3.0 3.1 3.2 3.3 StarWars-DatabankII Kylo Ren's Lightsaber in the Databank (backup link)
  4. 4.0 4.1 According to Star Wars: The Rise of Skywalker: The Visual Dictionary, Luke Skywalker began training his nephew Ben Solo 19 years before the Hosnian Cataclysm. Since Star Wars: Galactic Atlas dates the Hosnian Cataclysm to 34 ABY, Solo's Jedi training, during which he built his Jedi lightsaber, began in 15 ABY. His earliest known usage of the lightsaber was an encounter with the Knights of Ren in The Rise of Kylo Ren 2 when he was a teenager, according to an interview with writer Charles Soule on StarWars.com. Because The Rise of Skywalker: The Visual Dictionary establishes that Solo was born 29 years prior to the Hosnian Cataclysm using simple math it can be calculated that Solo built the lightsaber prior turning twenty years old in 25 ABY.
  5. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 Star Wars: Episode VIII The Last Jedi
  6. 6.0 6.1 6.2 6.3 Star Wars Lightsabers: A Guide to Weapons of the Force
  7. 7.0 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 Star Wars: Episode VII The Force Awakens
  8. StarWars-DatabankII Kyber Crystal (Lightsaber Crystal) in the Databank (backup link) — The kyber crystal Databank entry states that there is a kyber crystal "at the heart of every Jedi lightsaber."
  9. Ultimate Star Wars, New Edition
  10. Star Wars: The Last Jedi: The Visual Dictionary
  11. TCW mini logo Star Wars: The Clone Wars – "A Test of Strength"
  12. The Rise of Kylo Ren 2
  13. The Rise of Kylo Ren 1
  14. The Force Awakens: Rey's Story
  15. 15.0 15.1 Star Wars: Episode IX The Rise of Skywalker
  16. Dickens, Donna (December 1, 2014). 13 Stunning Pieces of 'Star Wars: The Force Awakens' Fan Art. HitFix. Retrieved on December 2, 2014.
  17. TwitterLogo Phil Szostak (@PhilSzostak) on Twitter "The lateral beams emanating from #LukeSkywalker’s lightsaber in Tom Jung’s 1977 posters for the original #StarWars (aka Episode IV: #ANewHope) inspired the crossguard design of #KyloRen’s lightsaber for #TheForceAwakens."

External linksEdit

Community content is available under CC-BY-SA unless otherwise noted.

Fandom may earn an affiliate commission on sales made from links on this page.

Stream the best stories.

Fandom may earn an affiliate commission on sales made from links on this page.

Get Disney+