The TIE line, or TIE-series, was a series of starfighters manufactured by Sienar Fleet Systems and later Sienar-Jaemus Fleet Systems, distinguished by their twin ion engines and solar collector panels. There existed dozens of different models.
- 1 Variants
- 2 Behind the scenes
- 3 Appearances
- 4 Sources
- 5 Notes and references
- 6 External links
Starfighters & bombers
The TIE series first saw manufacture by Sienar Fleet Systems during the Imperial Era. The first model was a prototype designed by Raith Sienar at the request of Grand Moff Wilhuff Tarkin and the Admiralty of the Imperial Navy. It sported the basic design of a ball-shaped cockpit mounted on pylons between two hexagonal solar panel wings, which powered twin ion engines. With the approval of Emperor Palpatine, the prototype lacked shields, but it also lacked the structural integrity to support atmospheric flight, so later designs were adapted to include stronger pylons.
The upgraded models evolved into the TIE/ln space superiority starfighter, which retained the prototype's design and became a ubiquitous symbol of Imperial authority. Imperial pilots would make use of flight simulators and TIE training drones for training purposes. One TIE variant was the TIE/rb heavy starfighter, a bulked-up version of the TIE/ln with heavier armor as well as a secondary pod with heavy laser cannons.
Another early TIE variant was the TIE/gt, which eventually evolved into the more prominent TIE/sa bomber, with inward-bent wings and a second pod to carry ordnance. A heavy variant was the TIE/ca "Punisher" Starfighter, which contained quadruple the payload of the TIE bomber. The TIE/fc, TIE/sr, TIE/rc, and TIE scout were models used for reconnaissance missions. While it resembled a TIE/ln, it featured a hyperdrive to allow for long-range travel.
Shuttles & transports
The TIE/sh shuttle was derived from the TIE bomber and maintained its two-pod configuration, with the second pod built to carry passengers between capital ships. It was identified by its wings, which were distinctively bent outward. Another TIE shuttle variant was the TIE Boarding Craft, which more closely resembled the TIE bomber and was used for the transportation and boarding of up to two stormtrooper squads. Along with the TIE shuttle, it was one of the few TIE variants equipped with deflector shields.
The TIE lander was a triple-hulled TIE variant that could transport an entire company of troops. A more unique model was the TIE/rp Reaper attack lander, a shuttle used to transport elite troops to points on a battlefield. It featured two pointed, forward-facing wings.
Advanced & experimental models
The TIE Advanced v1 was an advanced starfighter prototype equipped with a hyperdrive, shields, and curved folding wings with extra armor. It commonly saw use by members of the Inquisitorius. The TIE Advanced x1 was another advanced fighter with similar features, but was smaller and featured bent wings similar to the TIE bomber. One such model served as Darth Vader's personal starfighter. However, the TIE Advanced x1 was too expensive to mass-produce, so the TIE/IN interceptor was created as its successor. While it lacked a hyperdrive and shields, it featured extra laser cannons mounted on its pointed wingtips. The TIE Avenger was also inspired by the TIE Advanced.
Grand Admiral Thrawn's fighter initiative on Lothal saw the development of the elite TIE/d "Defender" Multi-Role Starfighter, which was equipped with heavy cannons, shields, and a hyperdrive. Its characteristic three wings resembled those of the TIE Interceptor inverted, and the fighter proved a powerful combatant against rebel starfighters. An even more powerful variant called the TIE/D Defender Elite was developed, but the entire project was halted by the destruction of the Lothal City fuel depot.
Other experimental TIE models included the TIE/ag "Aggressor" Starfighter, a medium attack craft with a rear-mounted turret, the TIE/ph "Phantom" Multi-Role Stealth Starfighter, which saw extremely limited use, the TIE/sk x1 experimental air superiority fighter, a fighter designed for optimal atmospheric flight and base defense, and the TIE crawler, a tank that resembled a TIE cockpit with tank treads replacing its wings.
Imperial remnants still utilized TIE fighters following the destruction of the Empire. Moff Gideon's Imperial remnant made use of several Outland TIE fighters, which resembled a TIE/ln, but featured wings that folded outwards upon landing. Commodore Visler Korda's Imperial remnant also produced the Auto-fighter, a drone TIE fighter, during its time on Rekkana.
The First Order Navy continued to use TIE fighters based on the Empire's designs. Manufactured by Sienar-Jaemus Fleet Systems, the new TIE models boasted significant upgrades from Imperial technology. The successor to the TIE/ln was the TIE/fo space superiority fighter, which, unlike most TIE models of the Empire, was equipped with basic shielding to protect the pilot.
The First Order Special Forces used the TIE/sf space superiority fighter, another advanced model equipped with a hyperdrive and shields as well as a gunner-operated turret on the underside of the cockpit. The fighter's hull featured red markings to identify its affiliation with Special Forces. Also in use were the First Order's own version of a TIE bomber, a transport called the TIE/es assault shuttle, and a stealth fighter known as the TIE/wi Interceptor.
More elite pilots such as Major Elrik Vonreg used the TIE/ba Baron Space Superiority Interceptor, an all-red TIE Interceptor. Inspired by the TIE Defender, First Order technicians sought to revive heavy weapons capabilities and developed the TIE/vn space superiority fighter, which was tested by only the most elite pilots, including Kylo Ren. Ren later utilized a TIE/wi modified interceptor during his time as Supreme Leader.
Behind the scenes
The TIE line first appeared in the first Star Wars film, Episode IV A New Hope of the Original trilogy, in 1977. Within Star Wars canon, it was first identified in the 2015 reference book Ultimate Star Wars. Star Wars: Rogue One: The Ultimate Visual Guide gave the alternate title of "TIE-series," but the 2019 novel Thrawn: Treason would later write this name as "TIE series."
- Star Wars: Galaxy of Heroes
- Rogue One: Recon A Star Wars 360 Experience
- LEGO Star Wars: The Freemaker Adventures
- Star Wars: Puzzle Droids
- Star Wars Resistance Racer
- LEGO Star Wars: The Force Awakens
- "Sithmas Battle"
Notes and references
- Ultimate Star Wars
- Star Wars: The Force Awakens: Incredible Cross-Sections
- Star Wars: Rogue One: The Ultimate Visual Guide
- Rogue One: A Star Wars Story
- Star Wars 5
- Star Wars Jedi: Fallen Order
- Star Wars Rebels – "The Call"
- Star Wars: Commander
- TIE Fighter 2
- Star Wars: Uprising
- Aftermath: Life Debt
- Lost Stars
- The Mandalorian – "Chapter 7: The Reckoning"
- Poe Dameron 10
- Star Wars Battlefront II
- Ultimate Star Wars, New Edition
- Choose Your Destiny: A Luke & Leia Adventure
- TIE Fighter Owners' Workshop Manual
- Star Wars Rebels – "The Antilles Extraction"
- Shadow Fall
- Star Wars: Complete Vehicles
- Starships and Speeders
- "TIE Fighters" – Star Wars Encyclopedia
- Alphabet Squadron
- Star Wars: The Rise of Skywalker: A Junior Novel
- Pirate's Price
- Star Wars: Complete Locations
- Star Wars: X-Wing Miniatures Game – TIE Reaper Expansion Pack (Card: Scarif Base Pilot—TIE Reaper)
- Star Wars: The Rebel Files
- Star Wars: Ships of the Galaxy
- Star Wars Rebels – "An Inside Man"
- Star Wars Rebels – "Secret Cargo"
- Star Wars Rebels – "Flight of the Defender"
- Star Wars Rebels – "DUME"
- "Hare-Brained Heist"—[[Star Wars Adventures Expression error: Unrecognized word "annual". Annual 2019|Star Wars Adventures Annual 2019]]
- Allegiance 1
- Galaxy's Edge 1
- Star Wars: The Rise of Skywalker: The Visual Dictionary
- Star Wars Resistance – "The Recruit"
- Star Wars: The Last Jedi: Incredible Cross-Sections
- Star Wars: Episode IV A New Hope
- Thrawn: Treason